Eastbrook Tuscan 1750 X 600mm Chrome Towel Radiator

Eastbrook Tuscan Chrome Towel Rail

This Towel Rail from Eastbrook’s Tuscan is a modern, eye catching towel rail ideal for any bathroom, en suite or cloakroom. Eastbrook’s Tuscan Towel Rail features a ladder type shape and finished in chrome. The tappings are approximately 50mm less than the width of the rail and roughly 75mm from the wall. To power this towel rail it takes 464 Watts and has a heat output of 1583 BTU. The Tuscan Towel Rail can be single fuel, dual fuel or all electric.

For an all electric Towel Rail/Radiator, fluid filling must be purcashed. Thic can be purchased in the drop down section.
Please note all fluid filled Towel Rails are special order so can not be returned.

Image shown is the 650 x 600mm model.

Tuscan White Towel Rail spec

• Product Code: 41.0313           
• Height: 1750mm
• Width: 600mm
• Watts: 537
• BTU: 1832
• Element: 300W
• Type: A, D, E or F

Type A 

Long Life PTC 600 Watt Element including T piece – code 8.002 – IP rating 55 ( zone 1,2 or 3 )

This element is a low cost solution for installations requiring background heat and towel drying only.

Type D

600 to 900 Watt element including radiator temperature thermostat for vertical installation  & T piece – code  8.312  – IP rating 54 ( zone 2 & 3 ) 

This is for background and full room heat and is controlled by the water temperature, it can be rated up to the output of the radiator, this is for vertical installations only.

Type E

600 Watt element including radiator temperature control thermostat for vertical or horizontal installation and T piece – code 8.012 – IP rating 54 ( zone 2 & 3 )  

This is for background and full room heat and is controlled by the water temperature, it can be rated up to the output of the radiator, this is for vertical or horizontal  installations. 

Type F

600 Watt element including digital thermostatic controlled thermostat for vertical or horizontalinstoillation, remote controll and T piece – code 8.314 – IP rating 54 ( zone 2 & 3 )

This is for background and full room heat and is controlled by the water temperature, it can be rated up to the output of the radiator, this is for vertical or horizontal  installations.